Simulation in detail
 

Acoustics

Why Acoustics?

Sound.  Whirring, buzzing, squeaking, squealing, growling, etc.  Sound causes an emotional response the product perception, essence and quality.

Simcenter 3D provides capabilities for:

  • Finite Element Acoustics - great for interior and exterior acoustics

  • Boundary Element Acoustics - make efficient model creation for complex geometries

  • Acoustics Modeling - highly efficient surface wrapping techniques to create fluid domain reduces pre-processing time

Brochures

NX Nastran Advanced Acoustics Brochure

NX Nastran

Advanced Acoustics

Simcenter 3D Acoustic Transfer Vector Brochure

Simcenter 3D

Acoustic Transfer Vector

Simcenter 3D Acoustics Accelerated BEM solvers Brochure

Simcenter 3D

Acoustics Accelerated BEM solvers

Simcenter 3D Acoustics BEM Solver Brochure

Simcenter 3D

Acoustics BEM solvers

Simcenter 3D Acoustics High Performance Brochure

Simcenter 3D

Acoustics High Performance

Simcenter 3D Engineering Desktop Brochure

Simcenter 3D

Engineering Desktop

Simcenter 3D environment for BEM Acoustics Brochure

Simcenter 3D

environment for BEM Acoustics

Simcenter 3D Meshing fo Acoustics Brochure

Simcenter 3D

Meshing for Acoustics

Simcenter 3D Noise and Vibration Modeling Brochure

Simcenter 3D

Noise & Vibration Modeling

Curated Information

The sound of silence - reduced noise with electric propulsion

Efficient simulate automotive pass by noise scenarios

Sound characterization of an automotive muffler

Efficiently predict noise radiation from a rotating machine

Solutions for powertrain acoustics

Reduced noise with electrical propulsion - technical compare

 

Aerostructures

Why Aerostructures?

Simcenter 3D Aerostructures is an end-to-end solution that will streamline your engineering process of the aircraft structural elements.  The potential benefits vs. the traditional process are projected to be:

  • 20% faster ramp-up time for new users

  • 30% productivity improvement

  • Faster simulation speed

  • Higher simulation quality

  • Configurable to streamline processes

Curated Information

Aircraft structural and engineering analysis whitepaper

Whitepaper - Aircraft structural and engineering analysis

Automation - Customization

Why Automation-Customization?

Analysts are a scare resource, so Simcenter 3D provides the ability to automate existing processes and embed the process knowledge into the solution.  This enables junior analysts to provide high-end analyses with the same level of quality.

Curated Information

Simulation-driven design to automate simulation processes

 

Composites

Why Composites?

As companies look for ways to lighten products yet maintain structural integrity, composites adoption continues to increase and become a larger part of a mixed material landscape.  With composites being a non-heterogeneous material, they provide specific challenges for design and analysis.​

Simcenter and Simcenter 3D along with other parts of the Siemens portfolio provide a comprehensive solution to evaluate composites from design to analysis to manufacturing.

Brochures

Simcenter 3D

Laminate Composites

LMS Samtech

Samcef Composites

NX Nastran Dynamic Response Brochure

NX Nastran

Dynamic Response

Curated Information

NX Laminate Composites

LMS Samtech Samcef in NX CAE

 

Durability

Why Durability?

You've spent hours making the product look just right, but will it stand the test of time.  Rather than expensive physical test, validate design early with simulation.​

Leverage advanced capabilities for fatigue analysis from Simcenter to determine the life of the product on results from Simcenter solvers as well as other leading solutions providers.

Curated Information

Siemens Durability Engineering Solutions

 
 

Engineering Desktop

Why Engineering Desktop?

The complexity of predictive engineering analytics is increasing.  Engineers need to perform complex analyses and ensure that the digital twin matches the physical counterpart.  Consequently, a wide variety of applications are needed to support most engineering design problems.  The Engineering Desktop provides an open framework with standard integration to leading analysis tools such as Simcenter 3D, Ansys, LS-Dyna, Abaqus, and MSC.Nastran.

 

The open approach enables companies to invest in a standard process while utilizing the advantages of unique predicitive solutions.  This flexibility enables companies to streamline the collaborative approach between engineering and analyst teams.  Also, it provides an opportunity to automate processes to offload work from advanced analysts to junior analysts, engineers and designers. 

Brochures

Simcenter 3D

Engineering Desktop

Simcenter 3D

Structures

Simcenter 3D

for NX Nastran 

Simcenter 3D

for ANSYS

Simcenter 3D

for LS-Dyna

Simcenter 3D

for Samcef

Simcenter 3D

for Abaqus

Simcenter 3D

for MSC Nastran 

Curated Information

LMS Samtech Samcef in NX CAE

Simcenter 3D Engineering Desktop Composites Innnovation Center Case Study

Composites Innovation Center

Simcenter 3D Engineering Desktop Design Automation Associates Case Study

Design Automation Associates

Simcenter 3D Engineering Desktop Hendrick Motorsports Case Study

Hendrick Motorsports

Simcenter 3D Engineering Desktop Services Précicad Case Study

Services Précicad

Simcenter 3D Engineering Desktop SIMERA Technology Group Case Study

SIMERA Technology Group

 

Flow

Why Flow?

Don't waste hours trying to define the problem.  Simcenter 3D enables fast model preparation with advanced surface wrap and meshing technology as well as model clean up.

This enables end users spending more time working on solving various flow types such as:

  •  Compressible flow

  • Incompressible flow

  • 1D flow networks that can couple with 3D

  • Non-Newtonian flow for variable viscosity problems

Shorten your time to do more with less and provide better insights with Simcenter 3D Flow.

Brochures

Simcenter 3D Flow

Simcenter 3D

Flow

Simcenter 3D Advanced Flow

Simcenter 3D

Advanced Flow

Simcenter 3D Electronic Systems Cooling

Simcenter 3D

Electronic Systems Cooling 

Simcenter 3D Advanced Fluid Modeling

Simcenter 3D

Advanced Fluid Modelding

Simcenter 3D Thermal / Flow DMP

Simcenter 3D

Thermal / Flow DMP

Curated Information

Simcenter 3D Flow - Report pressure drop and mass flow rate

Simcenter 3D Flow VIRO Case Study

VIRO

Flow

Why Flow?

Don't waste hours trying to define the problem.  Simcenter 3D enables fast model preparation with advanced surface wrap and meshing technology as well as model clean up.

This enables end users spending more time working on solving various flow types such as:

  • Compressible flow

  • Incompressible flow

  • 1D flow networks that can couple with 3D

  • Non-Newtonian flow for variable viscosity problems

Shorten your time to do more with less and provide better insights with Simcenter 3D Flow.

Brochures

Simcenter 3D Flow

Simcenter 3D

Flow

Simcenter 3D Advanced Flow

Simcenter 3D

Advanced Flow

Simcenter 3D Electronic Systems Cooling

Simcenter 3D

Electronic Systems Cooling 

Simcenter 3D Advanced Fluid Modeling

Simcenter 3D

Advanced Fluid Modeling

Simcenter 3D Thermal / Flow DMP

Simcenter 3D

Thermal / Flow DMP

Curated Information

Simcenter 3D Flow - Report pressure drop and mass flow rate

Simcenter 3D Flow VIRO Case Study

VIRO

Motion

Why Motion?

Purely looking at the kinematics and checking for interference is not enough for complex mechanical systems.  Engineers should be evaluating induced forces, velocities, acceleration and torques related to these systems.

 

Simcenter 3D Motion enables just this from any CAD system and apply the constraints.  This is coupled with very strong post-processing capabilities to evaluate and educate team members on the impact.

Types of motion analyses covered include:

  • Co-simulation with control systems

  • Flexible bodies

  • Rigid bodies

  • Interference checks

Better understand how your product in motion works.

Brochures

Simcenter 3D Motion

Simcenter 3D

Motion

Simcenter 3D Motion Standard Tire

Simcenter 3D

Motion Standard Tire

Simcenter 3D Motion Solver

Simcenter 3D

Motion Solver

Simcenter 3D Motion Systems and Controls

Simcenter 3D

Motion Systems and Controls

Simcenter 3D Moton Flexible Bodies

Simcenter 3D

Motion Flexible Bodies

Simcenter 3D Moton Modeling

Simcenter 3D

Motion Modeling

Simcenter 3D Motion CDTire

Simcenter 3D

Motion CDTire

Simcenter 3D Motion MF-Swift

Simcenter 3D

Motion MF-Swift

Curated Information

Find minimum torque on a winch

Driving simulator

Simcenter 3D Motion AMAZONE Case Study

AMAZONE

Simcenter 3D Motion Orbital ATK Case Study

Orbital ATK

Universal joint, cylindrical joint & harmonic load

AMAZONE Case Study

 

Multi-physics

Why Multi-physics?

Many problems are not related to one discipline but rather cross-domains.  This is why it is critical to have solutions that can work in concert to understand the interactions between disciplines.

 

Simcenter 3D provides a set of multi-physic solutions that include:

  • Fluid-Structural

  • Motion-Structural

  • Thermal-Fluid

  • Thermal-Stress

  • Vibro-Acoustic

Understand the interaction of domains that your product functions within.

Curated Information

Motion-Structural Analysis

Thermal-Stress Analysis

Vibro-Acoustic Analysis

 

Structural Dynamics

Why Structural Dynamics?

Structural Dynamics enables organizations to understand the response of the system under varying load conditions which could include:

  •  harmonic

  • transient

  • vibratory

  • shock

Structural Dynamics handles many dynamic loading types:

  • concentrated applied forces

  • distributed force loads

  • drop loads

  • enforced motion

Many response types are available: 

  • acceleration

  • displacement

  • element force

  • reaction force

  • stress

  • strain

  • velocity

Correlates to test results with virtual stress stain gages and accelerometers.

Brochures

Simcenter 3D Response Dynamics Brochure

Simcenter 3D

Response Dynamics

Simcenter 3D Noise and Vibration Modeling Brochure

Simcenter 3D

Noise & Vibration Modeling

Simcenter 3D FE Model Updating Brochure

Simcenter 3D

FE Model Updating

Simcenter 3D FE Model Correlation Brochure

Simcenter 3D

FE Model Correlation

 

Structures

Why Structures?

Structures is used to understand how your product reacts against stress and vibration.  As companies used mixed materials to support new objectives, it is important to have as system that can provide multiple types of analysis in one solution such as:

  • linear

  • non-linear

  • fatigue

Simcenter 3D provides this capability while being able to utilize other solvers in the same environment such as:

  • ANSYS

  • LS-Dyna

  • Abaqus

  • Samcef

  • MSC Nastran

Ensure that you product will meet the strenuous demands of your customers.

Brochures

Simcenter 3D Structures Brochure

Simcenter 3D

Structures

Simcenter 3D Nonlinear Solver Brochure

Simcenter 3D

Nonlinear Solver

Simcenter 3D for NX Nastran Brochure

Simcenter 3D

for NX Nastran

Simcenter 3D for MSC Nastran Brochure

Simcenter 3D

for MSC Nastran

Curated Information

Samsonite Case Study

Simcenter 3D Engineering Desktop Services Précicad Case Study

Services Précicad

Simcenter 3D Structures Nord-Lock Group Case Study

Nord-Lock Group

Simcenter 3D Structures Lohr Case Study

Lohr

Electra Meccanica Case Study

 

Thermal

Why Thermal?

Managing the thermal aspect of a product can have wide-ranging effect for both the product life and the perception of the product.  Whether it be cabin comfort, component longevity for electronics, or overall product performance and efficiency, managing the thermal aspect is a must for many companies.

Simcenter 3D Thermal provides capabilities for the following:

  • Thermal Modeling

  • Conduction

  • Convection

  • Conjugate Heat Transfer

  • Radiation

Make sure you take the heat off of your next project with Simcenter 3D Thermal solutions.

Brochures

Simcenter 3D Thermal Brochure

Simcenter 3D

Thermal

Simcenter 3D Advanced Thermal Brochure

Simcenter 3D

Advanced Thermal

Simcenter 3D Electronic Systems Cooling Brochure

Simcenter 3D

Electronic Systems Cooling

Simcenter 3D Space Systems Thermal Brochure

Simcenter 3D

Space Systems Thermal

Simcenter 3D Space Systems Thermal Brochure

Simcenter 3D

Thermal/Flow DMP

Curated Information

Samsonite Case Study

 

+1.248.247.0055

©2018 BY XPERIX INC.